① welding rod must be dry, well-ventilated indoor warehouse storage. Electrode storage bank, is not allowed to place harmful gases and corrosive media. Electrodes should be placed on the ground and not less than 300mm from the wall surface of the shelf, to prevent moisture.

② when the electrode should be stacked type, grade, batch, storage time, classification specifications and stacked, and should be clearly marked to avoid confusion.

③ a rod out of the library is generally not more than two days the amount of the amount of Welding Electrodes have been out of the library must be kept good.

④ guarantee the supply electrode unit using at least six months after the use, storage of the electrodes should be done before the first use of storage.

⑤ storage and safekeeping of special welding electrodes should be higher than the general, should be stacked in the warehouse or designated special areas, wet or damaged packaging allowed storage of untreated electrode.

⑥ electrode storage database should be set thermometer and hygrometer. The indoor temperature low hydrogen type electrode of not less than 50C, relative air humidity of 60%.

⑦ for damp, drug skin discoloration, rust welding electrode core has, subject to quality assessment after drying, if the performance indicators to meet the requirements before storage, otherwise it can not storage.

keywords:Copper Alloy Welding Wire