First, improve the stability of the arc. Light electrode with drug-free skin is not easy to ignite the arc. Even if the ignition can not be stable combustion. Electrodes drug skin generally contains potassium, sodium, calcium and low ionization potential of the substance, which can improve the stability of the arc, to ensure that the Nickel Welding Rod is ongoing. To protect the weld pool. Welding Rods, oxygen, nitrogen and water vapor in the air, immersed in the weld, the weld will bring adverse effects. Not only the formation of pores, but also reduce the weld mechanical properties and even lead to cracks. Electrode drug skin melting, resulting in a large number of gas enveloped the arc and weld pool will reduce the interaction of the molten metal and air. Weld cooling, the melting of drug skin formation of a layer of slag covering the weld surface to protect the weld metal and slow cooling, reducing the possibility of generating pores. To ensure that the weld deoxy to parathion impurities. Welding process protection, but still it is inevitable that a small amount of oxygen into the molten bath, metal and alloy oxidation and burning of the alloying elements, reduce weld quality. Therefore, the need to add a reducing agent (such as manganese, silicon, titanium, aluminum, etc.) in the electrode drug skin into the molten pool oxide reduction. Four supplementary weld alloying elements. Due to the high temperature of the arc, the weld metal alloying elements will be evaporation burning, so that the mechanical properties of weld decreased. Therefore, we must join the appropriate alloying elements to the weld through drug skin, to make up for the burning of the alloying elements to ensure or improve the mechanical properties of the weld. Some alloy steel, but also by the skin of the drug to the weld penetrate the alloy close to the weld metal and base metal composition, mechanical properties to catch up with even more than the base metals. And improve welding productivity, reduce splashing. The electrode drugs leather droplet increase and reduce the role of splashing. Aluminum Electrode was slightly lower than the melting point of drug skin welding the core of the solder joints, but welding the core in the central area of ??the arc, the higher temperature, the solder core is first melted, drug skin may cause delay in melting point. Formed in the electrode ends of a short segment of drug leather tube, and the role of Arc force, the droplet on the straight hitting the bath and make it conducive to the overhead position welding and vertical welding. In addition, the solder core coated with a drug leather, the arc heat is more concentrated. The same time, due to the reduction of metal loss caused by spatter, increase deposition coefficient, improved welding productivity. In addition, the amount of dust in the welding process will be reduced. Electrode using the instructions