Popular Search:  Tungsten Electrode  |  Mig Electrodes  |  Welding Rods      中文
Home
About Us
Welding Electrodes
Welding Wires
Core Wire
Welding Accessories
Packing
Service & Support
Contact Us
Products blog link
Welding Electrode Manufacturers
Welding Flux
Cast Iron Electrode
Stainless Steel Electrode
Welding Electrode Suppliers
Copper Electrode
Nickel Welding Electrodes
copper brazing alloys
welding cable
mig welding wires
cast iron welding wire
welding alloys
mig electrode
Cast Iron Welding Electrodes
Home > carbon steel welding rod > carbon steel electrode introduced
carbon steel electrode introduced
2012-06-12 by seoer8
 The Carbon Steel Electrode for use: carbon steel electrode (deposited metal tensile strength less than or equal to 500MPa namely 50kgf/mm2) applicable to carbon steel and low-strength low alloy steel welding. When you choose electrode, usually based on the chemical composition of steel, mechanical properties, crack resistance requirements must take into account the shape of the welded structure, working conditions, by the force condition and welding equipment performance factors. When necessary, Cast Iron Electrodesto carry out the welding test to determine the process measures, and then determine the choice of electrode. Usually requires plasticity, impact toughness, crack resistance, the choice of low-hydrogen electrodes. Special requirements may use a dedicated electrode selection of iron powder electrode in order to improve the welding efficiency, welding position. Low hydrogen, iron powder type electrode before welding electrodes must be baked at 350 ° C above, as far as possible to do with the drying with the use of the principle of how much baking how much, otherwise it will produce welding defects (such as porosity, slag, cracks, deterioration of process performance, etc.). Cellulose type electrode should be strictly in accordance with the provisions of the Manual baking temperature baking, the temperature is too high will burn the cellulose to the drug skin, damage inherent in the electrode process performance. Using low hydrogen electrodes, the welder should be living in the upwind position, to enhance ventilation, to prevent the hazards of welding fumes on the body. Low hydrogen type electrode baking the number of times as much as possible not more than twice to prevent drug skin to become brittle and fall off.
   keywords:    carbon steel welding rod
    nickel alloy welding wire
    mig welding wires
    welding consumables
    welding cable
    welding assembly
    Copper Electrode
    Tungsten Welding Electrode
Copyright 2012-2021 @ Hangzhou Lin'an Dayang Welding Material Co., Ltd. All Right Resrrved          Search engine optimisation and web design by china-webdesign.com