1, high welding repair accuracy
The output current of the welder, the time to get precise control, the current (2-200A) can be adjusted (1-500ms) within 2A small current and stable operation even if the 0.1mm, 0.2mm wire can also be perfect welding and laser welding the metal clamps repair accuracy.
2, a very small welding repair impact
The use of patented technology, the welder from the arc current, the time according to several times lower than the general TIG, to overcome the impact of the workpiece in the welding repair process, even without allowance of the workpiece machined surface can also be to be repaired.
3, the minimum heat-affected
Repair welding current, time to get precise control, and thus the energy input can be obtained precise control to ensure that the input energy is just enough for the fusion between the wire and the workpiece will not have too much energy to the workpiece, so that the surface heating to minimize the impact to achieve the desired repair effect.
 4 and a high degree of
This welder is a welding machine, welding. Combination of pipe clamping. Applicable to a variety of processing methods, and not other types of cold welding after welding combination is not solid, shedding phenomenon.
 5, applicable to different parts of the welding repair