E410-16

AWS A5.4

Welding of 0Cr13 stainless steels and similar steela,also surfacing for resistance to corrosion and abraion.

E307-16

AWS A5.4

Used for ASTM307 steel and dissimilar steel welding,can also be used to impact resistance corrosion steel surfacing and transition layer.

E385-16

AWS A5.4

It is suitable for welding and manufacturing all kinds of strong acid towers, tanks, pipelines and storage and transportation containers, etc. It has good point corrosion resistance to all kinds of strong acids and hot acids.

E309LMo-16

AWS A5.4

Suitable for the welding of dissimilar steels between stainless steel and carbon steel or low alloy steel, the bottom welding of stainless steel composite plate cladding, and the bottom welding when cladding 316 series stainless steel on carbon steel or low alloy steel.

E2209-16

AWS A5.4

It is suitable for welding of the corresponding steel 00Cr22Ni5Mo3N(SUS2205) and S31803 containing 22%Cr duplex stainless steel in the petrochemical industry.

E308LT1-1

AWS A5.22

Used for welding ultra-low-carbon 00Cr18Ni8 stainless steel.

E309LT1-1

AWS A5.22

Used for composite steel, dissimilar steel, and also used for surfacing welding on transition layers.

E316LT1-1

AWS A5.22

Used for welding ultra-low-carbon 00Cr18Ni12Mo2 stainless steel.

E2209T1-1

AWS A5.22

It is suitable for welding of 22%C duplex stainless steel such as 00Cr22Ni5Mo3N(SUS2205)in petrochemical industry.

E410NiMoT1-1

AWS A5.22

Suitable for more demanding water turbine rotor,valve and other wear and corrosion resistance occasions.

ERCu

AWS A5.7

Specifically recommended for the argon arc welding of copper and welding of copper with steel, cast iron and nickel alloys. Best for large components.

ERCuSi-A

AWS A5.7

Best for butt and the hard facing of brass, especially for the MIG welding of zinc coated steel sheet. Pre-heat suggested when MIG hard facing for large size products and use pulsed argon arc welding while hard facing on steel.

ERCuAl-A1

AWS A5.7

Perfect for welding of pure and austenitic steel sheet. Maintains good temperament flow and creates seamless welding line. Suggested for the butt joining welding of copper with steel, particularly suitable for machinery and shipbuilding industry. Pulsed argon arc welding is recommended for multilayer hard facing on steel.

ERCuAl-A2

AWS A5.7

Particularly suitable for the hard facing of Aluminum Bronze with steel. It has increased resistance to wear and abrasion, as well as superior corrosion resistance to seawater. Widely used for ship constructions, apparatus and plumbing. For multilayer hard facing on steel, pulsed Argon arc welding is recommended.

ERCuAl-A3

AWS A5.7

Particularly suitable for the butt joining welding and hard facing of copper-aluminum alloys, aluminum coated steel and cast iron .It has been widely used in shipbuilding, machinery, and the chemical industry. Best for the high hard facing requirement for hardness, resistance to wear, abrasion, and erosion.

RBCuZn-A

AWS A5.8

Most popular for padding material of gas-welding and carbon arc welding in brass. Can also used in brazing of copper, steel, copper-nickel, cast iron and carbide cutting alloy tools incrustation.

RBCuZn-B

AWS A5.8

This braze welding rod are similar to RBCuZn-A rods but contain additions of iron and manganese which serve to increase the hardness and strength. In addition, a small amount of silicon serves to control the vaporization of the zinc, yielding the low-fuming" property. The nickel addition assures uniform distribution of the iron in the deposit.

RBCuZn-C

AWS A5.8

Most popular for padding material of gas-welding and arc welding in brass. Can also used in brazing of copper, steel, copper-nickel, cast iron and carbide cutting tools incrustation.

RBCuZn-D

AWS A5.8

Utilized in the joints and gears of machinery, automatic technological industries, and steel-furniture industries. It is suitable for surface corrosion resistance hard facing for cast steel, cast iron, copper-alloy and nickel-alloy, as well as the butt welding of cast iron.

ERCuNi

AWS A5.7

Especially good for seawater corrosion resistance. Particularly suitable for the welding and hard facing of copper nickel such as machinery, desalting of seawater, ship-building, oil refinery, and food processing industries. Also suitable for welding of nonferrous alloys, dissimilar steel materials.